SMC液壓缸CDQSB12-10D-M9NV的技術指導
如果您對該產品感興趣的話,可以
產品名稱: SMC液壓缸CDQSB12-10D-M9NV的技術指導
產品型號: CDQSB12-10D-M9NV
產品展商: 日本SMC
產品文檔: 無相關文檔
簡單介紹
SMC液壓缸CDQSB12-10D-M9NV的技術指導
JISB1176, strength class 10.9 or higher) for cylinder mounting.
(?20: 2 pcs.; ?32 to ?100: 4 pcs.) 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
(JISB1176, strength class 10.9 or higher) for cylinder mounting. (
SMC液壓缸CDQSB12-10D-M9NV的
SMC液壓缸CDQSB12-10D-M9NV的技術指導
的詳細介紹
SMC液壓缸CDQSB12-10D-M9NV的技術指導
(JISB1176, strength class 10.9 or higher) for cylinder mounting.
(?20: 2 pcs.; ?32 to ?100: 4 pcs.)
2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
3. Make sure that the interlocking length of the rod end thread (male or female thread)
and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time,
be sure to release the air inside the cylinder and the piping. When the air release is complete,
operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure.
5. Since Series CHQB does not have an air release plug, release air from other components (e.g. from piping, etc.) as well.
6. When mounting the cylinder body with mounting bolts, use the tightening torques in the table at right as a guide
(JISB1176, strength class 10.9 or higher) for cylinder mounting.
(?20: 2 pcs.; ?32 to ?100: 4 pcs.) 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
(JISB1176, strength class 10.9 or higher) for cylinder mounting. (?20: 2 pcs.; ?32 to ?100: 4 pcs.)
2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
3. Make sure that the interlocking length of the rod end thread (male or female thread) and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time,
be sure to release the air inside the cylinder and the piping. When the air release is complete, operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure. 5. Since Series CHQB does not have an air release plug,
release air from other components (e.g. from piping, etc.) as well. 6. When mounting the cylinder body with mounting bolts,
use the tightening torques in the table at right as a guide
3. Make sure that the interlocking length of the rod end thread (male or female thread)
and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time, be sure to release the air inside the cylinder and the piping。
When the air release is complete, operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure.
5. Since Series CHQB does not have an air release plug,
release air from other components (e.g. from piping, etc.) as well.
6. When mounting the cylinder body with mounting bolts,
use the tightening torques in the table at right as a guide
SMC液壓缸CDQSB12-10D-M9NV的技術指導 手機：17321017802（微信）
郵箱：[email protected]
電話：021-39529829
傳真：021-39529831-8007
聯系人：
公司：上海乾拓貿易有限公司
